1 / 4
Curana CLite mudguard rear right mounting hardware 4mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified, shorter and angled, version of the mounting hardware to fit on the right rear side of the bike.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This replaces the original rear mounting hardware with something that gives more space between the tire and the mudguard. It is based on the same design as the front mounting hardware. This is side-specific so make sure to also get the left version of this one.
Fits 4mm metal strut.
Had great results printing:
- the male piece vertically, thread at the top, with supports only around the round bit where the screw threads in
- the cap vertically with the large opening at the top
- using AddNorth X-PLA