1 / 5
Faceted Pot for 6” hydroponic nets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The nets used measured about 6” across with a small inner lip that holds it secure. I suspect about any 6”-6.5” net pot will work. Scale accordingly. Will scale into more of a vase successfully.
I recommend printing these with thick nozzles in vase mode. I used .8mm nozzle and set it to print 1.2mm wide lines and .55mm layers in PETG.
The PETG prints worked great, but the 2 PLA tests didn’t hold water at the base and will need a bead of silicon around the base or more testing.
Printed in GreenGate3D R-PETG in Billie Ruben's Cherry Pie (red) and the no-longer-available Black Raspberry (daaaaark Purple)