Faceted Pot for 6” hydroponic nets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Faceted pots for use with 6" hydroponic nets
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The nets used measured about 6” across with a small inner lip that holds it secure. I suspect about any 6”-6.5” net pot will work. Scale accordingly. Will scale into more of a vase successfully.
I recommend printing these with thick nozzles in vase mode. I used .8mm nozzle and set it to print 1.2mm wide lines and .55mm layers in PETG.
The PETG prints worked great, but the 2 PLA tests didn’t hold water at the base and will need a bead of silicon around the base or more testing.
Printed in GreenGate3D R-PETG in Billie Ruben's Cherry Pie (red) and the no-longer-available Black Raspberry (daaaaark Purple)