RepRack 20mm and 20.5mm Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20mm and 20.5mm Version for common pipes in germany.
- Ocena
- 5 / 5
- Polubienia
- 129
- Pobrania
- 759
- Wydruki
- 17
- Wyświetlenia
- 3909
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
In Germany its very hard to find 19mm outer diameter pipe. So I decided to make a 20mm version. The holes are 20,5mm diameter. First try with 20mm holes was too tight and difficult to assemble.
I recommend to print first the test part to ensure that the diameter has the desired size.
To clamp the tubes into the holders, 3.5x16mm "self-tapping" screws are suitable
For the side-mounted clamps, these are unfortunately not suitable because the holes in the holder are too large.
Thanks to @Repkord for the awesome design.
Happy printing!
20.10.22
Added picture with screws.
Added screw recommendation.
11.04.26
Added 20mm version.