RepRack 20mm and 20.5mm Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
20mm and 20.5mm Version for common pipes in germany.
- Rating
- 5 / 5
- Likes
- 129
- Downloads
- 759
- Makes
- 17
- Views
- 3,909
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
In Germany its very hard to find 19mm outer diameter pipe. So I decided to make a 20mm version. The holes are 20,5mm diameter. First try with 20mm holes was too tight and difficult to assemble.
I recommend to print first the test part to ensure that the diameter has the desired size.
To clamp the tubes into the holders, 3.5x16mm "self-tapping" screws are suitable
For the side-mounted clamps, these are unfortunately not suitable because the holes in the holder are too large.
Thanks to @Repkord for the awesome design.
Happy printing!
20.10.22
Added picture with screws.
Added screw recommendation.
11.04.26
Added 20mm version.