USB-C charger replacement housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement usb-c housing for my phone charger
- Ocena
- 3 / 5
- Polubienia
- 20
- Pobrania
- 207
- Wydruki
- 3
- Wyświetlenia
- 895
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Recently the usb-c housing on my phone charger (charger for Samsung Galaxy s10, but probably fits many others) broke and one part got lost so I couldn’t glue it back together. The connector itself was fine so I decided to print a new housing for it.
The two parts should have a pretty snug fit with the connector (you might have to help it with pliers to get it in fully), use a little bit of glue to hold secure them together (I just used superglue) and carefully clamp them together to let the glue dry.
I also added a version without the little dividers inside if they get in the way for you.
(This one was printed with Fillamentum traffic black filament)