Minimal IKEA LIVBOJ wireless charger phone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use an IKEA LIVBOJ to create a Qi-certified/compatible wireless phone charging stand that supports both portrait and…
- Ocena
- 4,8 / 5
- Polubienia
- 35
- Pobrania
- 271
- Wydruki
- 4
- Wyświetlenia
- 1758
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Use an IKEA LIVBOJ to create a Qi-certified/compatible wireless phone charging stand that supports both portrait and landscape orientations! No supports are required.
If the dimensions don't work with your phone, you can use the .f3d (Fusion 360) file to remix the design to meet your needs.
LIVBOJ ($5)
white: https://www.ikea.com/us/en/p/livboj-wireless-charger-white-00457495/
black: https://www.ikea.com/us/en/p/livboj-wireless-charger-black-90447058/
So far, tested on:
- Pixel 3 XL (in case) (163.5mm x 83mm)
UPDATES:
v11: extend back piece to prevent stand from tipping over as easily in landscape orientation
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm layer height
Infill:
10%
Filament:
Inland PLA
Notes:
should take around 3 hours to print with these settings
use some superglue to attach the back to the front
Category: Mobile Phone