Flashforge Adventurer 3 "adjustable" air ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A number of air ducts, with different air flows, to use with the Flashforge Adventurer 3 Airduct Mod by GyuOh Choi.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 785
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These are a number of air ducts that can be used with theFlashForge Adventurer 3 Airduct Mod by GyuOh Choi, as a way to get some kind of adjustable parts cooling with the Flashforge Adventurer 3.
The percentages stamped on the ducts are a rough indication of how much air will is directed towards the part and nozzle, but should not be taken as correct or precise values for the actual air flow.
The rest of the air is blown out through the back of the duct, so hot-end wil be cooled even if using a 0% duct.
Two sets of ducts are included. One based on the duct from the airduct mod, and one based on the duct from Flashforge.
I use the original design from Flashforge, which is more directed and creates a faster air flow, but the design used by madsqlj, with a slower and wider air flow, seems to be quite popular.
Percentages
I have only used ducts for 30%, 50%, 75% and 100% so far. Those works fine, but I suspect the ones closer to (but not at) 0% or 100% will be less useful.
The following percentages are included: 0%, 10%, 20%, 25%, 30%, 40%, 50%, 60%, 70%, 75%, 80%, 90%, 100%.
Things
Print Settings (used for the objects in the photos)
- Printer Brand: FlashForge
- Printer: Adventurer 3
- Rafts: No
- Supports: Yes
- Resolution: 0.12
- Infill: 100%
- Filament: PrimaSelect ABS White