1 / 2
Towel Holder for IKEA Godmorgon Bråviken wash stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a towel holder for the IKEA Godmorgon Bråviken wash stand in the photo.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a towel holder for the IKEA Godmorgon Bråbiken wash stand in the photo.
2021-12-03 Improved design.
2020-04-30 Added version without screws.
Print instructions
- Recommended 9 perimeters (at 0.4) on the sides so they are strong.
Version without screws
- The bar will need supports in the protruding parts.
Version with screws:
- The sacrificial layer on the sides has a thickness of 0.25, so no more than that layer height (0.2 is ok).
Post-Printing
Version without screws
- Glue the two bar parts.
- Glue the sides to the bar.
Version with screws
Needs 3x M5x40 socket head screws and 3x M5 square nuts.
- Join the two bar parts with an M5-40 screw and M5 square nut.
- Remove the sacrificial layer from the sides and use 2x M5-40 screws to connect them to the bar. Use optional 2x M5 square nuts.