1 / 2
Towel Holder for IKEA Godmorgon Bråviken wash stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a towel holder for the IKEA Godmorgon Bråviken wash stand in the photo.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 1
- Views
- 822
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a towel holder for the IKEA Godmorgon Bråbiken wash stand in the photo.
2021-12-03 Improved design.
2020-04-30 Added version without screws.
Print instructions
- Recommended 9 perimeters (at 0.4) on the sides so they are strong.
Version without screws
- The bar will need supports in the protruding parts.
Version with screws:
- The sacrificial layer on the sides has a thickness of 0.25, so no more than that layer height (0.2 is ok).
Post-Printing
Version without screws
- Glue the two bar parts.
- Glue the sides to the bar.
Version with screws
Needs 3x M5x40 socket head screws and 3x M5 square nuts.
- Join the two bar parts with an M5-40 screw and M5 square nut.
- Remove the sacrificial layer from the sides and use 2x M5-40 screws to connect them to the bar. Use optional 2x M5 square nuts.