1 / 3
Elegoo Mars 2 Cover Handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handle to lift the cover with one hand
- Ocena
- 4,667 / 5
- Polubienia
- 40
- Pobrania
- 239
- Wydruki
- 2
- Wyświetlenia
- 999
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (56)Powiązane
This is a heavy duty handle for the cover of the Elegoo Mars 2. It uses M5 screws and a bracket on the bottom side for a more stable mount. You will need the following
- M5 X 22mm qty 2
- M5 Washers qty 2
- M5 Bolts qty 2
- Drill Bit, larger than the bolts diameter, 3/8 or more.
You will have to drill the top so measure five times and drill once. Put painters tape as to mark and not scratch the cover. this setup is very sturdy.