1 / 3
Elegoo Mars 2 Cover Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handle to lift the cover with one hand
- Rating
- 4.667 / 5
- Likes
- 40
- Downloads
- 239
- Makes
- 2
- Views
- 999
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a heavy duty handle for the cover of the Elegoo Mars 2. It uses M5 screws and a bracket on the bottom side for a more stable mount. You will need the following
- M5 X 22mm qty 2
- M5 Washers qty 2
- M5 Bolts qty 2
- Drill Bit, larger than the bolts diameter, 3/8 or more.
You will have to drill the top so measure five times and drill once. Put painters tape as to mark and not scratch the cover. this setup is very sturdy.