Voron V0 TopHat Pi Cam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi cam case with ball-sphere adapter to mount in the V0 tophat corner
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 684
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a remix of SNEAKS great work! I'm using that case with the original piCam V2 and also with a clone from amazon (you maybe have to modifiy the lense hole of the front cover) with different printers.
the back of the cam case is a little bit lower than the original one, also the sphere hole is smaller.
You will need a M3x16mm screw to mount it with a tophat corner. So it will replace the origin M3x12 screw.
I sticked the 50cm long cam cable with double sided VHB tape directly to the top panel. With the shown cable route it's possible to connect the cam directly to pi at the back, without twisting and without touching the XY belts.