Porte savon/gel douche - soap or shower gel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soap holder that fits on a 20 mm diameter shower rod. Porte-savon qui s'adapte sur une barre de douche de Ø20 mm
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
in french below
I designed this Fusion 360 soap dish to fit a 20mm diameter shower rod. I printed it in PLA with a 0.4mm nozzle. It can also be printed in PETG with a 0.6mm nozzle for more strength. What do you think ?
The assembly is done with 12mm screws and nuts size M4. I created two holes on the right side of the shower gel holder to facilitate the assembly.
-------------------------
J'ai conçu ce porte-savon Fusion 360 pour s'adapter à une barre de douche de 20mm de diamètre. Je l'ai imprimé en PLA avec une buse de 0,4 mm. Il peut également être imprimé en PETG avec une buse de 0,6 mm pour plus de résistance. Qu'en pensez-vous ?
L'assemblage se fait avec des vis de 12mm et des écrous de taille M4. J'ai créé deux trous sur le côté droit du porte-gel douche pour faciliter l'assemblage.