15 mm Rail to dual NATO Rail Adapter 50 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to attach NATO Accessory Rail camera accessories to a standard pair of 15 mm rods. 50 mm length.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This adapter allows you to attach NATO Accessory Rail camera accessories to a standard 15 mm camera rail consisting of two rods with the diameter of 15 mm, spaced 60 mm apart.
The photos show one of these adapters, printed in PETG (black) with a NATO rail clamp attached. Normally you would only print it in PETG because it is hard to get the holes for the 15 mm rails correctly in PLA but it works very well in PETG. The hole is slightly larger than 15 mm to allow some tolerance for rods from different manufacturers not being exactly 60 mm apart.
Originally I was searching various camera stores for this type of adapter, but it seems like no one has thought of it before (which is surprising). So I designed this in three separate lengths. This one is 50 mm long.