Cooler Master NR200 Top Panel Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solid cover for the NR200 top panel when the mesh panel is removed.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 3371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
masterThis is a top cover intended to replace the mesh of the top panel on the Cooler Master NR200 PC case. The cover leaves cutouts for the top fans (intended for use with fan grills via my external mounting hardware at https://www.printables.com/model/306692-nr200-hardware-for-top-panel-external-fan-grills).
When used as exhaust, the mesh of the top panel serves only to restrict airflow which is of minimal help in a positive air pressure scenario. With the mesh removed, the top panel has relatively large hexagonal openings which I wasn't comfortable leaving vulnerable in a public space for fear something could fall into them and short out a component. This model covers all of the holes whie leaving the fans open (recommend external fan grills to prevent damage to wandering fingers).
The design is intended to pressure fit into the top panel's channels for the mesh. If your machine overextrudes, you may need to sand down the insert tabs a little.