1 / 2
Bin for Ryobi Link with lid and print in place magnets! — zdjęcie 1
1 / 2

Bin for Ryobi Link with lid and print in place magnets!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's a single bin for Ryobi Link! Comes with a lid, and to help hold the lid in place, uses print in place magnets!

Ocena
0 / 5
Polubienia
35
Pobrania
142
Wydruki
0
Wyświetlenia
907
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The official bins are good, but sometimes I need a lid to keep things from jumping out. Enter this bin. It has a lid, and uses some print-in-place magnets to help keep the lid in place!

The bin uses my cleat design to add a cleat on the back for wall mounting, and on the bottom if you need to keep it in place on a box or workspace.

To add the magnets, just add a pause in your print, and drop in some 8x3mm magnets. These are the same sized magnets used in most motor visualizers.

Tagi