1 / 3
Printer Bed Filament Drying Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why not use your printer bed to dry your filament?
- Ocena
- 0 / 5
- Polubienia
- 88
- Pobrania
- 426
- Wydruki
- 0
- Wyświetlenia
- 4366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (113)Powiązane
Use your print bed to dry your filament!
Uses an 80mm fan and a heated print bed. For 1KG rolls.
I recommend 50-55C for most filaments.
Model fits exactly on the Prusa MK3 bed (turn off skirts in order for it to fit).
I printed it in ABS so it has the best long-term heat resistance.