Flint and Steel Fire Starter Case with tinder storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case utilizes the inserts for Clipper lighters to create a spark for your tinder. Nice backup fire starter!
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 1063
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a great primary or backup fire starter for your outdoors adventures. This is an inexpensive holder and storage container for the Clipper lighter replacement flint cartridge and the tinder of your choice. If you use a waterproof tender, it can even survive getting wet, although you may have to dry out the striker first. Put it in you backpack as emergency fire starter and you'll have a great secondary if you lose your primary fire starter.
The cartridges are keyed and a friction fit in the holder. I ordered my flint cartridges from Amazon here: https://www.amazon.com//dp/B0973GD8YN
I have provided the STEP files for this model if you would like to modify it!
Printing
Print flat side down for cap and body. For the striker_top print with the threads on the heat bed. You will want to paint some support for the very center around the hole
Filament - PLA or PETG
Infill - 20%
Layer Height - .20mm
Supports - Painted on around the underside of the hole in the striker_holder section.
Parimeters - 4-6 works well
Additional Parts - None
Bed Adhesion - PETG needs some glue stick if your using a PEI bed
Rafts - None
Scaling - Scale at your own discretion, just remember the striker cartridge is sized to the current print size.
Filament Change - None, but printing the different parts different colors could look nice.
Post Printing Notes:
If you decide to print this model, please post a make with some nice pictures. I love to see what folks are doing with my models.
Happy Printing!
You can help
To help cover the expenses of printing prototypes for the models I share, please consider a donation by purchasing an item from my Amazon wishlist here
Please leave a comment and let me know how you like this model.
Here are my other similar models related to EDC
printables search – EDC @HandyHandcrafts
Also, if you like this model, check out my other models over here:
https://www.printables.com/social/130916-hendersons-handcrafts/models
Award winning Model “Japanese Toolbox” for the "Box Contest: here:
https://www.printables.com/model/260100-japanese-toolbox-inspired-locking-lid-box
Below are just few of my other models |
 |