Tinkering with portals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wrench going through a portal to make a pair of knobs
- Ocena
- 0 / 5
- Polubienia
- 72
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 763
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
the knobs have a M4 thread. if printed in one piece with a color print, it might be possible to glue it on something. But i would recommend using a M4 bolt.
Printing
layer height 0.20mm
infill 20% grid
perimeters 3
The Wrench G-code is a sequential print. (To minimize travel and thus stringing)
(Print Settings > Output options > Complete individual objects)
Wrench2 has a bridge that has to be removed or by using Wrench2 without bridge you can add support instead of a bridge.
Needs Support
Doesn't need support
Alternatively you can also print it with a color change but you can't use sequential printing so you'll still have to print twice if you want two different colored portals.