Tinkering with portals
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wrench going through a portal to make a pair of knobs
- Rating
- 0 / 5
- Likes
- 72
- Downloads
- 62
- Makes
- 0
- Views
- 763
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
the knobs have a M4 thread. if printed in one piece with a color print, it might be possible to glue it on something. But i would recommend using a M4 bolt.
Printing
layer height 0.20mm
infill 20% grid
perimeters 3
The Wrench G-code is a sequential print. (To minimize travel and thus stringing)
(Print Settings > Output options > Complete individual objects)
Wrench2 has a bridge that has to be removed or by using Wrench2 without bridge you can add support instead of a bridge.
Needs Support
Doesn't need support
Alternatively you can also print it with a color change but you can't use sequential printing so you'll still have to print twice if you want two different colored portals.