Basketball for a Trash Can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small basketball basket for your trash can or to mount it on the wall.
- Ocena
- 5 / 5
- Polubienia
- 164
- Pobrania
- 481
- Wydruki
- 4
- Wyświetlenia
- 3566
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here it is, the Basketball Trash Can. (update, addet a smaller board to fit the Prusa Mini)
This is a funny litte projekt to print. You can print the basket with or without the net. You can clip it in a trash can or mount it on the wall without the clip. You can use double sidet tape or screws.
Materials i used are PETG (PLA, ABS or whatever is good) for board, the clip, the ring and the ring attachment. The net is made of TPU. You also need three M3x12 screws and nuts.
I printed the board in two colors. The bottom layers in black and the top layers in white, but you dont need to. The net is made in 2 parts. On one side of each net are 2 knobs to put them together.
I printed all parts with a 0,6 Nozzle, the net with a 0,4. You can use a 0,4 for all parts if you want.
Hope you like it.
Enjoy