1 / 1
Miata aftermarket gauge cluster V2 — zdjęcie 1

Miata aftermarket gauge cluster V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

FIXED SOME ISSUES WITH THE MODEL... REDOWNLOAD!

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is Version 2 that prints as one piece

Includes 4 spots for 2" (50.8mm) gauges (oil pressure, water temp, fuel, and volts)

2 spots for a 3 3/8" (86.725mm) Speedo and Tach

Drill 4 small 7mm holes for blinkers, check engine light, and high beam indicator

350mm x 160mm x 87mm or it may not fit…


For the print, I recommend ASA/ABS and anneal it since temps in a car can get pretty high...
100% infill
Can use PLA to test fi

Tagi