AMD Wraith Prism 120mm Fan Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple adapter for attaching a 120mm fan to an AMD Wraith Prism heatsink.
- Ocena
- 4 / 5
- Polubienia
- 24
- Pobrania
- 256
- Wydruki
- 3
- Wyświetlenia
- 1856
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I created this adapter in Fusion 360 using a model posted by Josh as reference.
My goal with this remix was to:
- Add more support to the corners holding the fan to accommodate heavier fans.
- Make an attempt to improve airflow by adding a small ‘shroud’ over the heatsink, and smooth out the curves inside the adapter.
I also chamfered the outside edges to reduce any excess plastic introduced in my design.
Overall this design is a drop shorter and a gram or two lighter than the original. I can't say that this version is a big improvement over the original, and as expected, there wasn't any measurable difference in cooling performance, but its nice to have options so I figured I would post it anyway.
Printed with my Ender-2 Pro using Prusament PETG.
Sliced with PrusaSlicer at .2 layer height, no supports,