Split Print HexScraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The HexScraper in two parts, for smaller print beds.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Because small print beds need scraping too!
I took the HexScraper, split it in half and added guide pins/holes to assist in putting it back together. The motivation for this was being able to print it on the Tina2, which has a smallish print area.
Print Settings
The back should be printed with supports, so that the square pegs print correctly, otherwise follow the print settings from the original (0.15mm layer height).
Post Processing
The square pegs will need to be filed down to fit (especially the downward facing side with the supports). Once you're sure they'll fit, add a dab of glue to each square and slam the pieces together.
Notes
It might flex a little bit at the join point, but that's the price we pay for small beds.