Electric Junction Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I feel that the ones you buy is of low quality or quite expencive and I need something in between so did a little remix.
- Ocena
- 5 / 5
- Polubienia
- 156
- Pobrania
- 1252
- Wydruki
- 9
- Wyświetlenia
- 5456
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v3.0
Se below for update (V5)
For this model you will also need 4x M3 heat brass inserts and 4x M3x12 hex screw
I print mine in PETG 0.4 nozzle 0.3 hight 3 layers and 25% cubic infill
Drill the holes with a step drill as needed on work sight, all are pre marked for easy drilling
Pro tip : Mount ziptie in anchor before you work with the wires , easy to complete job and fasten the ziptie in the end of the work to tough down the wires , and makes easy to fit the lid.
UPDATE: Also added a other model my version 5 hence V5 , faster print time, big cut out in the rear, and sligtly lower casing and a lid with chamfer on all edges for a better feel, lid will fit the older casing also.
Enjoy !