1 / 2
Solder Fumes Fan and Filter Stand (120mm) — zdjęcie 1
1 / 2

Solder Fumes Fan and Filter Stand (120mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple but effective stand for a 120mm fan and a 120x120x10mm activated carbon air filter.

Ocena
5 / 5
Polubienia
47
Pobrania
238
Wydruki
7
Wyświetlenia
1415
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
GNU General Public License v3.0

The assembly should be self explainable, the feet should be pressed into the body as far as possible, the slots became narrower to the end so the feet don't loose to easy.

I suggest printing the body laying flat and the feet upright. Be aware that the left and right feet are symmetric but not equal. The model is optimized for a 0.6mm nozzle and 0.25mm layer height. But I tried to match the dimension also for 0.4mm nozzles. Support should not be required.

To fix the fan on the body you can use default fan screws as well as M3 or M4 combined with a nut. To insert the filter slightly bend it over the top clamp and slide it into the body, afterwards you can push it under the clamp on the top. The filter dimensions should be ~120x120x10mm.

I hope you enjoy the model :) - after testing several downloaded models and wasn't satisfied by any of them I decided to create my one one. The key advantages over many other solder fan stands are:

  • The model is easy to print without support.
  • The filter fits in tightly so no air escapes around the filter.
  • The filter is still easy to change.
  • Easy assembly, as only one part needs to be screwed to the fan.
  • It doesn't look to bulky or massive and uses comparably less filament.

Tagi