BTT EBB36 Canbus Voron CW2 Mount (Moons pancake motor only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is design specialised for mounting BTT EBB36 canbus board on Voron Stealburner CW2
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 247
- Wydruki
- 0
- Wyświetlenia
- 3789
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This model is modified from KayosMaker canboard mount
https://github.com/KayosMaker/CANboard_Mounts
It is design specialised for mounting BTT EBB36 canbus board on Voron Stealburner CW2 and can still use dragchain for cable management
Requires 6x M3 heatsets, 2x M3x6mm Flat head screw, 2x 15mm copper/steel pillar
The Flat head screw is required for prevent hitting dragchain while moving x axis to 0
There is extra screw hole design to secure with the cable door screw to get extra support for the part
You will need the modified cable door for that
Updated:
For moon's pancake motor only, because moon's pancake motor is 17.4mm thick there is some space for the mount to stay in position and not blocking the dragchain, that is also why you will need 15mm pillar for that