Easy to Print Generic H0 / 1:87 heavy duty lowloader wagon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For all your heavy hauling needs!
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 1243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Expanding the Easy to print range!
something i threw up in fusion in 40 minutes or so. Fits 3 hotwheels cars for scale.
Supports
The body halves can be printed without supports upright although a brim is recommended. The bogeys need supports on build plate only.
The build plate should look like this, NEM stuff and screws excluded this all you need!
Layer height
0.20 or finer is recommended for detail but can also be printed at 0.30 with lightning infill if you are in a dire need of a low loader.
Fittings and assembly
The bogeys have a standard NEM pocket that should fit any NEM coupling but are designed with regular european hook and loop couplings in mind. Any standard NEM wagon wheel set should fit just fine (even pizzacutters) a drop of oil is recommended but is not necessary for smooth rolling
Additionally you will need 2x M3 10 screws and 2x M3 hex nuts