P
Printablessale723
NEMA 17 3D model
This is a 3D model of NEMA 17 stepper motor. The dimensions of the stepper are 43x43x33mm, shaft is 22mm.
- Pobrania
- 7199
- Polubienia
- 63
- Ocena
- 4,67
Wyniki wyszukiwania: nem
Liczymy pasujące modele…
P
PrintablesDavide Mognaschi
NEMA17 Planetary Gearbox
This model is a very compact motor-reducer, with precise movement and without backlash. The overall height is 29mm, only 6mm more than the motor shaft. The reduction ratio is (1 + 38/14) : 1 , roughly 3.7 : 1 Print instructions The model…
- Pobrania
- 5040
- Polubienia
- 893
- Ocena
- 4,82
P
PrintablesPetclaud
NEMA (extruder) motor rotation indicator
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
- Pobrania
- 4710
- Polubienia
- 606
- Ocena
- 4,85
P
Printablescewo
A Better Hex Print Bed Scraper (accurate geometry and refinements)
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
- Pobrania
- 3852
- Polubienia
- 164
- Ocena
- 4,93
P
PrintablesNiH
Dualsense simple phonemount
A little experiment with mounting my mobile phone (OP8T with bumper case) to a PS5 Dualsense controller using a simple snap-on mount. Borrowed the profile for the snap-on part from https://www.thingiverse.com/thing:4668566 . Included are…
- Pobrania
- 3336
- Polubienia
- 271
- Ocena
- 4,87
P
PrintablesMoritz
Nema 17 mounting bracket/holder
General information Simple mounting bracket for Nema 17 stepper motor with holes for 4mm screw. Print instructions Layer Hight: 0.2mm Infill: 20% Supports: no Nozzel: 0.4 is recommended
- Pobrania
- 2219
- Polubienia
- 66
- Ocena
- 4,8
P
PrintablesHDz_designs
Sherpa "Extra" Heavy with NEMA17 (Update 2)
Update 2: Optimized design in CAD + Improved some structural rigidity. (23-06-2024) Thank you Annex Engineering for creating a very fine extruder in the beginning. Check them out: Sherpa Heavy All standard from the Sherpa Heavy…
- Pobrania
- 1992
- Polubienia
- 306
- Ocena
- 5
P
PrintablesMaximilian Puschmann
V2 -- Nema 17 Peristaltic Pump / Water Pump / measuring Pump
🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…
- Pobrania
- 1876
- Polubienia
- 1486
- Ocena
- 3,83
P
Printablesm2rechtin
80:1 NEMA 17 Planetary Gearbox
I made a video showing the assembly and comparing FDM and resin prints of this model: The video also has a list of required hardware in the description.
- Pobrania
- 1823
- Polubienia
- 229
- Ocena
- 5
P
PrintablesHarry
Weather Station One Part 5 - the Wind Vane and Anemometer
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
- Pobrania
- 1766
- Polubienia
- 263
- Ocena
- 4,67
P
PrintablesDibujor
Extruder (NEMA) motor rotation indicators
After learning about the rotation indicators for the extruder motor, I loved the idea, but I didn't really like any of the designs I was seeing. I wanted a gear/cog but couldn't find any I liked. So I made my own, I just wanted one but…
- Pobrania
- 1730
- Polubienia
- 264
- Ocena
- 4,97
P
PrintablesMLoeko
Voron stealthburner clockwork2 extruder nema17 v1
I've made a modified version of clockwork2 extruder to use my nema17 stepper motor that was lying around. currently there is no option to attach wire cover or use pcb https://photos.app.goo.gl/kay8pqxwpjpPym6F9 video example of working…
- Pobrania
- 1587
- Polubienia
- 204
- Ocena
- 5
P
PrintablesErik van de Pol
MPCNC Primo Nema17 drag chain mounts
Drag chain mount for MPCNC Primo, remixed from thing https://www.thingiverse.com/thing:4613811 . I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a…
- Pobrania
- 1547
- Polubienia
- 103
- Ocena
- 5
P
PrintablesEwest
Ecotech MP10/MP40/MP60 Anemone Safe REPLACEMENT guards
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
- Pobrania
- 1546
- Polubienia
- 51
- Ocena
- 5
P
PrintablesMark Rhodes
Inverse Kinematic Paint Mixer
This is my Inverse Kinematic Paint Mixer, as seen at https://youtu.be/FnnN7typFP0 These printed parts combined with the following non-printable parts will make an automated mixing station for your small paint bottles (up to 45mm…
- Pobrania
- 1461
- Polubienia
- 208
- Ocena
- 5
P
Printablesledrone.club
The PickleWhoop (20, 25 & 30) : cinematic whoop frame
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Check those accessories for the PickleWhoop by Milo Perriand (Full GoPro mount,…
- Pobrania
- 1454
- Polubienia
- 189
- Ocena
- 5
P
PrintablesVlastimil
Anemometer with Hall sensor and magnet
I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…
- Pobrania
- 1344
- Polubienia
- 109
- Ocena
- 5
P
PrintablesRtan Steele
DnD Enemy Tokens
DnD Skeleton/Mob Tokens, that fit on a standard 1" grid map. Helps DM and Players keep track of what enemy is where, and helps clarify which enemy is doing what or which to target. By Default they are 1" standard sized tokens, but can be…
- Pobrania
- 1327
- Polubienia
- 242
- Ocena
- 5
P
PrintablesLush
Minimalistic Motorized Roller Blinds - NEMA 17 stepper motor gear and mount
Minimalistic Motorized Roller Blinds via esphome and homeassistant. To automate your roller blinds for: open blinds slowly and noiseless when waking up, coupled to your alarm clock close blinds on hot summer days control blinds if you are…
- Pobrania
- 1125
- Polubienia
- 380
- Ocena
- 4,5
P
Printablescndewil
Nema 17 stepper motor vertical mount
Works with motors up to 40mm in height and have the nema 17 standart. Wall line count should be high since they will endure the pressure of the screws I used 7 but 5 should be enough. Print with legs straight up not on it's side(like the…
- Pobrania
- 1122
- Polubienia
- 54
- Ocena
- 5
P
PrintablesJS-studio
Nemesis head
Nemesis Head from RESIDENT EVIL 3 Remake For every fan :) Print instructions needs support under his chin
- Pobrania
- 1106
- Polubienia
- 138
- Ocena
- 5
P
PrintablesLaserBorg
NEMA17 Planetary Gearbox - fixed export
same model but exported as separate files as the original STL file won't work in Cura Slicer.
- Pobrania
- 1091
- Polubienia
- 75
- Ocena
- 5
P
PrintablesJGFTW
Press Fit Pulley Extractor for Nema 17
This model is inspired by Jake_of_all_Trades Pulley Extractor (https://www.thingiverse.com/thing:3593964) but with changes: fillets added (for removing failure point when using excessive force) chamfer added (removed sharp edges for…
- Pobrania
- 1038
- Polubienia
- 92
- Ocena
- 4,27
P
PrintablesNanodesigner
Staffe ad L - Bracket NEMA 17 - NEMA 23 - NEMA 34
Staffe ad L - Bracket NEMA 17 - NEMA 23 - NEMA 34 . per motori stepper Creati con solidworks per le misure complete consultare i file pdf. Sono inclusi file solidworks parts. L Brackets - NEMA 17 Bracket - NEMA 23 - NEMA 34. for stepper…
- Pobrania
- 1021
- Polubienia
- 62
- Ocena
- 5
P
PrintablesMaximilian Puschmann
V1 -- Nema 17 Peristaltic Pump / Water Pump / measuring Pump
Version 2 out now in a remix ---> All you need is a Nema 17 motor, 4 x 608 bearings and some 8mm plastic Tubing (Soft tube needed). You will also need some 16mm M3 screws to attach the pump assembly to the stepper motor. Of course the…
- Pobrania
- 1013
- Polubienia
- 422
- Ocena
- 4,2
P
PrintablesBobbyThunder
Evil Gift Card Torture Box - The perfect gift for your enemy (or friends)
Gift cards are boring. Need a way to make them more exciting while also being obnoxious? This is the model for you! Print 1 of the top files (window or not windowed), 1 of the bottom files, and the spacer. I would only do 1 of the…
- Pobrania
- 990
- Polubienia
- 747
- Ocena
- 4,95
P
PrintablesJay3D Designs
The Office Cinema Film Room Sign Box
The Office Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.: 17.5cm x…
- Pobrania
- 931
- Polubienia
- 411
- Ocena
- 5
P
Printables3D Printing World
Sanemi’s Print-in-Place Collapsing Sword
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
- Pobrania
- 916
- Polubienia
- 90
- Ocena
- 5
P
PrintablesZeVeX
Compact Planetary Gear for Nema17 - 4:1 gear ratio (f3d for adapter)
Introduction: The idea for the planetary gearbox emerged while building a roller blind control, where the Nema 17 motor lacked the holding torque necessary to maintain the position of the blind. This need led to the exploration of…
- Pobrania
- 843
- Polubienia
- 105
- Ocena
- 4,5
P
Printables𝗨𝗻𝗶𝗺𝗮𝘁𝗿𝗶𝘅𝗥𝗲𝗱🪐🌠
Star Trek: Nemesis Tricorder
Here's my version of the tricorder prop seen in Star Trek: Nemesis. It was a fairly simple prop design that featured a large LCD display screen and a flip-up sensor lid. The lid uses a 6x2mm magnet to hold it closed. To connect the lid to…
- Pobrania
- 819
- Polubienia
- 177
- Ocena
- 5
P
PrintablesMegardStudio
Super Simple NEMA (extruder) motor rotation indicator (Prusa MK2(S)/MK2.5/MK3)
Super simple visualizer that stays out of the way. And it prints in like 5 minutes. Just use a small magnet to mount like all the others.
- Pobrania
- 810
- Polubienia
- 79
- Ocena
- 4,93
P
PrintablesPeters3DBox
MP40 Anemone Guard Remix
I added more protection in the grill to prevent fish and snails from getting into the impeller area.
- Pobrania
- 781
- Polubienia
- 34
- Ocena
- 5
P
PrintablesPiotrC
Nema17 2-stage planetary gearbox 10:1
Here’s a design for a 2-stage planetary gearbox with ~ 10:1 reduction. It’s around 40mm tall and fits nicely on top of the Nema17 stepper motor, joined with some (>40mm) M3 bolts. The gearbox works just fine under the load and provides a…
- Pobrania
- 780
- Polubienia
- 117
- Ocena
- 0
P
PrintablesPlasticNinjas
Nemesis Player Dashboard (RU)
Планшет персонажа для настольной игры "Немезида". Из трех частей. Ремикс. Изменения: Все места для карт с учетом что они в протекторах; Увеличенные высоты для колод действий и сбора; Слегка изменил хранение кубов в качестве боеприпасов…
- Pobrania
- 778
- Polubienia
- 111
- Ocena
- 5
P
PrintablesCasual CNC
Planetary Reduction Gear for NEMA 17 with Ratio of 5:1 and 25 GT2 Teeth
Planetary reduction gear for belted z-axis driven by NEMA 17 stepper motor. It has a reduction ratio of 5:1 and 25 GT2 teeth. This results in 10 mm/rotation. It may be mounted as a drop-in extension/replacement if your current drive has…
- Pobrania
- 765
- Polubienia
- 266
- Ocena
- 5
P
Printablesfreedom2000
AS5600 encoder holder for NEMA17 stepper motor
A simple holder for AS5600 magnetic encoder that can be used with a NEMA17 motor. Details here : https://community.simplefoc.com/t/simplefoclibrary-support-for-stepper-motors/137/42 Category: Engineering
- Pobrania
- 759
- Polubienia
- 22
- Ocena
- 0
P
PrintablesRedeye
Helios 44-2 oval anamorphic anamorfake adapture diaphragm cinematic bokeh
Easy and fast to print. Just remove the rear glas element of the Helios 44-2 and place the apaturein it. You also can add some fishing line to it and color it blue for cinematic lensflares. Print Settings Rafts: No Supports: No…
- Pobrania
- 751
- Polubienia
- 20
- Ocena
- 0
P
PrintablesOndrej
25 : 1 ratio planetary gearbox for NEMA 17 stepper
Additional parts: 3 mm washers (14x) M3 x 30 mm bolts (4x) M3 x 16 mm bolts (4x) M3 x 10 mm bolts (6x) M3 x 20 mm bolts (3x) M3 nuts (13x) 6808 bearings (1x) 623 bearings (6x)
- Pobrania
- 749
- Polubienia
- 109
- Ocena
- 5
P
PrintablesArwgLacyProgramming
NEMESIS ULTRA-DETAILED SUPPORT-FREE BUST 3D MODEL
Do you like what you see? Then check out our Kickstarter campaign in order to get much more of them for a very fair price! https://www.patreon.com/user?u=101962371 Ultra-detailed high-poly Nemesis character bust 3D model, Support-free…
- Pobrania
- 730
- Polubienia
- 104
- Ocena
- 5
P
PrintablesRoed
EBB36 PG7 Mount behind NEMA14 stepper
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
- Pobrania
- 724
- Polubienia
- 103
- Ocena
- 4,8
P
PrintablesPlasticNinjas
Engines of Nemesis Board Game (RU)
This is a REMIX of engines from Nemesis – 3D Game Board STL Files . For personal and non-commercial use only. Engine models have been changed to fit the engine tokens of the Russian version of Nemesis. If you have a non-Russian version of…
- Pobrania
- 713
- Polubienia
- 67
- Ocena
- 5
P
PrintablesPhenixPapillon
Boule ornement joyeuses fetes ou joyeux noel
Petite ou grande décoration de Noel, vous pouvez l'agrandir à vos souhaits, à placer sur le mur, le sapin, les fenetres, etc … Il y a 2 modèles différents : joyeuses fetes ou joyeux noel. Imprimé avec une hauteur de couche de 0.2 et un…
- Pobrania
- 710
- Polubienia
- 50
- Ocena
- 5
P
Printables3DPrintDemon
NEMESIS Dual Fan Unit Sovol SV01 Now With BMG, E3DV6 & 5015 Fan Options!!
May I present the arch villain to all of your heroes, the bad guy dressed in black. NEMESIS! Enjoy! edit: New inductive probe version & heat insert version included for E3DV6 systems. NOTE a firmware change is required to use the…
- Pobrania
- 692
- Polubienia
- 79
- Ocena
- 4,73
P
PrintablesStanley
Nema 17 Stepper 5:1 Planetary Gearbox with 5mm shaft for GT2 pulley
Nema 17 Gearbox with 5mm shaft, fits GT2 Timing Belt Pulley. Remix of: http://www.thingiverse.com/thing:8460 Cover is in two versions with or without 4mm holes for M3 threaded inserts. Bill of materials: Nema 17 stepper motor M3 nuts 6pcs…
- Pobrania
- 681
- Polubienia
- 113
- Ocena
- 5
P
Printablesnitromike502
NEMA 17 Cycloidal Drive
A Cycloidal Gearbox with a 20:1 reduction ratio, for driving just about anything. I haven't tested the force output yet, but it nearly broke my finger when trying to hold the output. Feel free to modify the motor bolt pattern for your…
- Pobrania
- 657
- Polubienia
- 49
- Ocena
- 0
P
Printables𝗨𝗻𝗶𝗺𝗮𝘁𝗿𝗶𝘅𝗥𝗲𝗱🪐🌠
Star Trek: Nemesis Dolphin Phaser V2
Here's my newest version of the dolphin phaser, complete with internal reveal and belt holster. This new version has smoother contours, better handle and grip, and sleeker overall shape. Model Notes Uses 6x2mm magnets to hold the forward…
- Pobrania
- 654
- Polubienia
- 109
- Ocena
- 4,7
P
PrintablesBoris Atanasov
NEMA17 Planetary Gearbox - fixed export to stl directly
simply adding ready to print stls instead of obj that had issues with orca
- Pobrania
- 652
- Polubienia
- 214
- Ocena
- 0
P
Printableshopping3d
Wind turbine for nema 17 stepper motor
Here is a good use for a stepper motor that would otherwise sit around and collect dust. This is a work in progress and the results so far look promising. I wanted a design that was simple and that didn't require any hardware. No screws…
- Pobrania
- 647
- Polubienia
- 50
- Ocena
- 5
P
PrintablesMeltMotive
Windmill Anemometer Wind Direction Indicator
Wind indicator, without additional bearings. Printed from PLA. After printing the bearings gently hold and move them, then add some oil. The blades for the windmill should be printed with supports. Bearings should be printed at a height…
- Pobrania
- 640
- Polubienia
- 165
- Ocena
- 5
P
Printablesakizdor
Voron stealthburner Clockwork2 nema17 with cable cover
Parts should fit perfectly if printed with recommended Voron settings. For those who want to put in on Voron SW, you may need to edit or sand a bit of the carriage parts(to which you attach mgn12) as it may interfere with the stepper…
- Pobrania
- 633
- Polubienia
- 63
- Ocena
- 4,5
P
Printablesavaghon
airflow funnel for uni-t anemometer
Funnel that mounts on the Uni-T UT363S To measure the airflow of a household ventilation system you can use an anemometer with a funnel that fits around the vent-opening. (up to 185 mm) Then calculate the flow with the surface area of the…
- Pobrania
- 616
- Polubienia
- 14
- Ocena
- 0
P
PrintablesmangoByte
AS5600 encoder Nema17 stepper motor mount
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
- Pobrania
- 614
- Polubienia
- 24
- Ocena
- 5
P
PrintablesBen Friesen
Sleeping pad pump sack adapters - Thermarest, Klymit, Sea to Summit, Big Agnes, Nemo, Exped
Like many people, I really dislike the Thermarest pump sacks. I think they’re a really lazy design from Thermarest and clearly they can do better because every other company has. The two best pump sacks I’e used are the Exped Schnozzel…
- Pobrania
- 601
- Polubienia
- 37
- Ocena
- 0
P
Printablessale723
NEMA 17 holder/mout
This is a 3D model of a NEMA 17 holder/mount. This project does not contain a model of the stepper motor NEMA 17, that part can be found in my other projects. This project contains .ipt and .stl files. The project was drawn in Autodesk…
- Pobrania
- 590
- Polubienia
- 24
- Ocena
- 3,5
P
PrintablesPlasticNinjas
Nemesis Board Game intruder bases (RU)
Магнитные базы для чужих, с помощью которых не придется вместе с самой миниатюрой перетаскивать кубы, отмечающие попадания. Для монстров потребуются круглые магниты 14 шт., размером 14*1. Так же вам потребуются распечатать и приклеить к…
- Pobrania
- 589
- Polubienia
- 64
- Ocena
- 4
P
PrintablesJakob Fromm
Nemesis Lockdown Insert / Organiser
The insert will fit everything from the Lockdown Kickstarter, except the following: Door Tokens and Stands (The insert hold the 3D Doors) Cat (which is actually a racoon) and Rover Token (Insert has room for 3D models) The insert fits…
- Pobrania
- 540
- Polubienia
- 69
- Ocena
- 5
P
PrintablesGrafit
Severance - Macrodata Refinement
Apple's new series inspired a lot of artists already. I have modeled this in Blender and made it 3d printable. The biggest part, the four desks together fit exactly on a Prusa Mini. The tiny parts should be printed on a resin printer. But…
- Pobrania
- 536
- Polubienia
- 160
- Ocena
- 5
P
Printablesjamdog2477
5:1 Planetary Gear Reducer for Nema 17 Stepper Motors
Modeled in Siemens NX. Printed the Planet and Sun Gears out of Nylon with 0.25 Nozzle at 0.07mm layer height and 100% infill, the Carrier out of Nylon with 0.4 Nozzle and 0.1mm layer height and 100% infill, the rest out of PLA with 0.4…
- Pobrania
- 536
- Polubienia
- 62
- Ocena
- 5
P
Printablesgameyspirits
Nemesis Retaliation board game insert/organizer (remix) w/ sleeved cards, sangrevores, neoflesh, xyrians, support squad, stretch goals, terrain, untold stories 4, and acrylics
Nemesis Retaliation board game insert/organizer using the core box and the sangrevore expansion box. The sangrevore box holds all the enemy miniatures. The core box holds everything else. The insert supports the following: core box…
- Pobrania
- 512
- Polubienia
- 52
- Ocena
- 5
P
PrintablesThaliaFP
DnD Enemy tokens with 6x2mm magnets
I put in magnets to work with them on vertical surfaces. Print as desired, looks best with a filament change.
- Pobrania
- 510
- Polubienia
- 81
- Ocena
- 5
P
PrintablesThomas Kluge
AS5600 Mounting plate for NEMA17
Note: You have to use slightly longer M3 Bolts
- Pobrania
- 509
- Polubienia
- 22
- Ocena
- 5
P
Printableszhaor3
20:1 Cycloidal Drive for Nema 17
Updates: Rollerdisk2 contains four M5 mounting locations ana d new Rollercover design This compact cycloidal gearbox is specifically designed for NEMA 17 stepper motors. Assembly requires M3 bolts M5 heat sink 3×15 mm dowel pins two…
- Pobrania
- 507
- Polubienia
- 53
- Ocena
- 0
P
PrintablesParker
Nema 17 gearbox 1:6 ratio
I made this gearbox for a robotic arm i never ended up making, the gearboxes are more or less fine but struggled on high loads. you will also need 3 bearings whioch are 3mm ID, 10mm OD, and 4mm thickness/width. (optional) 3 .5mm metal…
- Pobrania
- 504
- Polubienia
- 23
- Ocena
- 0
P
Printablesledrone.club
The PickleWhoop V2 (25) : cinematic whoop frame
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Updates 2026/09/14 : added frame STEP files + DJI O4 Wide cam mount 2025/01/16 :…
- Pobrania
- 496
- Polubienia
- 51
- Ocena
- 0
P
Printablesedison_cz
Anemometer with wind direction
This is a model of the anemometer with wind speed and direction measurements. The whole can be mounted to a 40 mm pole. Electronics inside contains 3 PCBs: AS5048 demo board from Austria Microsystems in a set with round directional magnet…
- Pobrania
- 494
- Polubienia
- 81
- Ocena
- 5
P
PrintablesModel Magic
Resident Evil - Nemesis - 2002
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 491
- Polubienia
- 54
- Ocena
- 0
P
PrintablesLinuTec
Schrittmotorhalter Nema17 / Stepper motor mount Nema17
Schrittmotorhalter Nema17 / Stepper motor mount Nema17
- Pobrania
- 476
- Polubienia
- 37
- Ocena
- 5
P
PrintablesDominik Paľo
NEMA 17 spacers (1-10 mm)
Simple spacers to increase the distance between NEMA 17 stepper motors and mounts.
- Pobrania
- 475
- Polubienia
- 29
- Ocena
- 4,6
P
PrintablesPlasticNinjas
Nemesis board game Organizer
Органайзер для русской версии настольной игры Немезида. Особенности: Разработан с учетом карт в протекторах; Учтено место для персонажа "Медик" в случае его наличия; Удобство использования и снижение времени на подготовку игры; Часть…
- Pobrania
- 474
- Polubienia
- 121
- Ocena
- 5
P
PrintablesMrStolarsky
20" and 23" Apple Cinema Display VESA adapter
UPDATE: I've put few of these on Etsy https://www.etsy.com/listing/943346116/vesa-adapter-for-aluminium-apple-cinema This is a remix of Lazerlord's 30" Cinema Display adapter for 20" and 23" models. GoPro mount (remix of…
- Pobrania
- 470
- Polubienia
- 24
- Ocena
- 5
P
PrintablesAndré
Computer terminal for Nemesis
Almost a direct copy of the remix source, but I added solids under the floating keyboards to make it printable. Category: Toy & Game Accessories
- Pobrania
- 467
- Polubienia
- 39
- Ocena
- 5
P
PrintablesAdam
Anemometer with wind vane - Parametric
All the hardware i will be using is necessary for the stock version. Though you can modify the parameters to fit your screws and bearings. I opted to use bearings since it makes the whole assembly pretty much silent. It is also very…
- Pobrania
- 463
- Polubienia
- 129
- Ocena
- 4,67
P
PrintablesEA3D
Nema 23 Stepper Motor shaft D8 length 41-115mm
Stepper Motor Nema 23 length 41-115mm shaft D8
- Pobrania
- 458
- Polubienia
- 9
- Ocena
- 0
P
Printablesredirector
Voron V0.2 Nema 17 mount
The Voron V0.2 nema 17 mount is a modification of the Voron v0.2 nema 14 mount. I have not yet created support for the hinges. The bottom can be screwed to the corner frame using a m3x8 Socket Head screw. The m3x25 button head screw…
- Pobrania
- 455
- Polubienia
- 115
- Ocena
- 4,33
P
PrintablesThefahmialias
NEMA 17 Planetary Gear
i use : 0.12 layer height 0.2mm nozzle high temperature pla required support
- Pobrania
- 425
- Polubienia
- 69
- Ocena
- 5
P
PrintablesRIT Makerspace
Compound Planetary Gear Box (38:1 and 50.4:1) NEMA 17
I've already used this gearbox to build a 5-axis robotic arm which will eventually also be available here. These gearboxes provide a lot of torque and are surprisingly durable with minimal backlash. They are not backdrivable. The photos…
- Pobrania
- 418
- Polubienia
- 73
- Ocena
- 4,75
P
PrintablesThinos
Cinema enclosure for helios 44M
It features two gear with standard module for use with a follow focus, a integrated sun shield. The front diameter will be adjusted to accomodate a mate box but I don't have one at the time and I am already very pleased with the design.…
- Pobrania
- 414
- Polubienia
- 75
- Ocena
- 3,75
P
PrintablesPotterke
Cycloidal drive for Nema 17
This cycloidal gearbox is meant for Nema 17 motors and uses 2 6903RS bearings. This gearbox is smooth but will give noticeable backlash after much use. It is a 20:1 gearbox which means it gives 20 times the torque but 20 times less speed.
- Pobrania
- 413
- Polubienia
- 19
- Ocena
- 0
P
PrintablesStuNZ
NEMA 17 Planetary Gearbox (Modular)
Planetary Gearbox bolts directly onto a NEMA 17 stepper motor using M3 bolts. One layer gives you a 3:1 gear ratio. Add as many extra layers as you like to achieve any gear ratio in powers of three. Designed in Autodesk Fusion. Originally…
- Pobrania
- 406
- Polubienia
- 70
- Ocena
- 0
P
Printables3D-Muc
NEMA 17 mount for 20x20mm Alu profile
Simple, stable mount for a NEMA 17 stepper motor Easy to print as flat on front side Aluminum profile size 20x20mm 2 versions, longitudinal to the profile and transverse Category: 3D Printer Parts
- Pobrania
- 402
- Polubienia
- 58
- Ocena
- 5
P
PrintablesAziz Vicentini
Nema 17 support for EasyThreed K10 - New version!
02/08/2025 - Update Better X mount XY base with optional screw hole Z base and mount Updated config for Z This is a Nema 17 support for EasyThreed K10 and config file to improve quality and speed of printer The config file k10_cfg.txt…
- Pobrania
- 396
- Polubienia
- 25
- Ocena
- 5
P
PrintablesCombined Workplace
5 Giant Rat enemies (Including the Big One)
Giant rats, found under every tavern ever existed. Designed for Giant Rat Monster profile
- Pobrania
- 388
- Polubienia
- 19
- Ocena
- 5
P
PrintablesNeburalis
NEMA 17 Stepper Motor Parametric CAD Model (Fusion 360 / STEP) — For Assemblies Only
⚠ THIS MODEL IS NOT FOR 3D PRINTING — it is a CAD reference body for use in Fusion 360 assemblies only. A parametric NEMA 17 stepper motor model designed for use in Fusion 360 assemblies. The geometry is intentionally simplified (no…
- Pobrania
- 387
- Polubienia
- 8
- Ocena
- 5
P
PrintablesZRNNN
Peristaltic Pump _ Nema 17 _ 608 Bearings
as i only had 608 ball bearings, i created my own peristaltic pump. It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas. - All the screws required are M3. - The silicone…
- Pobrania
- 385
- Polubienia
- 41
- Ocena
- 0
P
PrintablesDoug Joseph (design8studio)
LowRider v4 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v5.0)
This allows use of my earlier kinematic accessory tool mount on the awesome new LowRider v4 CNC . Here's an old-yet-helpful video I made about the earlier version (which was for LowRider v3): This whole deal is an adaptation of a Maxwell…
- Pobrania
- 374
- Polubienia
- 63
- Ocena
- 4,67
P
PrintablesNadir @ CN3D
Sovol SV08 MAX Gantry V2 (NEMA17, Double Shear)
Fully 3D printed Gantry for the SV08 MAX Note you can use this also with the stock motors but you will not put the extra bearings to support the shaft! ✅ What’s New This is the double shear variant of the SV08 MAX Front-access belt…
- Pobrania
- 373
- Polubienia
- 68
- Ocena
- 3
P
PrintablesC3D
Obanai & Sanemi - Demon Slayer Bookmarks Set 6/8
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
- Pobrania
- 371
- Polubienia
- 78
- Ocena
- 5
P
PrintablesDmoto Design Labs
Mag Mount Phone Camera Cinema Rig UPDATED 9.24.2026
UPDATE: 9.24.2026 From feedback from others and person use, the handles were bending with just one fastener in the center. So updated the Main Frame & Handle with 2 1/4"-20 Socket Head Screw Fasteners to eliminate the handle flexing. No…
- Pobrania
- 370
- Polubienia
- 361
- Ocena
- 5
P
PrintablesSK Engineering
adjustable Stepper Mount Nema 17
adjustable Stepper Mount Nema 17 This adjustable Stepper Mount was designed for a DIY laser cutter project. The Stepper Mount is fixed with two M4 with 20mm screws and T-Nuts. The case itself is attached to the item profile with two M4…
- Pobrania
- 367
- Polubienia
- 56
- Ocena
- 5
P
PrintablesLittleSilvr
Stepper Motor Flag - Nema 17 (5mm Shaft)
I used Prusa-slicer to alter the original design by NotLikeALeafOnTheWind. I needed something that I could actually hold onto to stall the motor easily. Quick Print under 10 minutes.
- Pobrania
- 367
- Polubienia
- 26
- Ocena
- 5
P
PrintablesBigRedButton
Nema17 stepper motor
A NEMA17 stepper motor mock-up with a rotating shaft and face mounting capabilities. Print Settings Printer: Prusa i3 MK2 Dolly Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Post-Printing Remove supports and clean up. Assemble…
- Pobrania
- 364
- Polubienia
- 30
- Ocena
- 5
P
Printablesemtrax
Nema 17 Stepper Motor - Bracket / Mount & Belt Tensioner
This is a bracket/mount with an integrated belt tensioner for nema 17 stepper motors. You only need the two printed parts, 2x M3x40 socket head cap screw and 2x M3 threaded insert brass nuts. Now you can fine-tune the belt tension of your…
- Pobrania
- 359
- Polubienia
- 49
- Ocena
- 5
P
PrintablesLukasius
Bracket for Nema 17 stepper motor - Reinforced
Strong and easy to print bracket for Nema 17 stepper motor. Bracket was designed from scratch for my DIY 3D printer. Main goals for design : bracket must cooperate with end mount for motor screew ( this means that some of its dimmensions…
- Pobrania
- 354
- Polubienia
- 41
- Ocena
- 0
P
PrintablesJumperWAVE
Wind direction anemometer
Be kind this is my first post :) A print the scale 1 Category: Outdoor & Garden
- Pobrania
- 353
- Polubienia
- 55
- Ocena
- 4,67
P
PrintablesJay3D Designs
Stranger Things Cinema Film Room Sign Box
Stranger Things Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.:…
- Pobrania
- 352
- Polubienia
- 58
- Ocena
- 5
P
PrintablesKB
Nema 17 Stepper Motor Spacer - 1.9mm - With Step File
Basic Nema 17 Spacer with Step File for any custom spacing you require. I printed mine as per below: Printer: Ender 3 V2 Material: ABS+ (As mine was going in a heated enclosure) Filament Brand: ESUN Infill: 30% (So i could clamp the motor…
- Pobrania
- 351
- Polubienia
- 19
- Ocena
- 5
P
PrintablesBCDesign3D
NEMA17 Motor Covers with Voron Logo for Switchwire
There is something that I really missing from Voron Switchwire machines... The motor cover... So I decide to make one... One? TBH, not one…. a many, and for different motors too! :D for original OEM motors and LDO and friends (I mean big…
- Pobrania
- 347
- Polubienia
- 90
- Ocena
- 5