1 / 4
Shop Vac Attachment Mount for 2.5", 1.25", and some 1.875" (1⅞" Ridgid) — zdjęcie 1
1 / 4

Shop Vac Attachment Mount for 2.5", 1.25", and some 1.875" (1⅞" Ridgid)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

1,85 € – 2,26 € netto (bez VAT)

Dla pliku: Shop Vac Dual Mount v9_0.2mm_PETG_MK3S_2h18m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 2,05 € netto (środek widełek).

Masa podana przez autora
22 g
Czas druku podany przez autora
2,3 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Single mount that fits most shop vac attachments: large 2.5" (2½"), small 1.25" (1¼"), and oddball Ridgid 1.875" (1⅞")

Ocena
5 / 5
Polubienia
94
Pobrania
326
Wydruki
4
Wyświetlenia
2902
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed.

Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on the weight of the attachment. Use 0.3mm layer height for additional grip.

Single mount that fits most shop vac attachments: 

  • standard large 2.5" (2½") fits the outer petals
  • standard small 1.25" (1¼") fits the inner petals
  • some oddball Ridgid 1.875" (1⅞") will fit inside the outer petals (see last photo)

Two model versions: 

  • First only includes the outer petals (2.5" and some 1.875")
  • Second version (updated 2022-11-27) includes mounts for all three sizes, but uses more filament.

Tagi