Printer Z Layer Calibration Test Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple test model, it has overhangs and a test pattern to test layer tolerance. Prints without supports.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Hey, This is my first published model, I made it to test out my new Bambu Labs X1 Carbon with PETG. I had some layer adhesion issues prior to buying a textured PEI bed for it. The print is designed to test layers. I imprinted a pattern onto a generic bracket to test this, the model above was printed at standard speed 0.16mm layers White Overture PETG 1 Hour 8 Minutes. Hopefully someone else can find this model helpful, I also included a STEP file for anyone who for any reason wants to modify or reuse this model. Thanks for reading!