1 / 3
Printer Z Layer Calibration Test Bracket — image 1
1 / 3

Printer Z Layer Calibration Test Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple test model, it has overhangs and a test pattern to test layer tolerance. Prints without supports.

Rating
0 / 5
Likes
4
Downloads
28
Makes
0
Views
366
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Public Domain

Hey, This is my first published model, I made it to test out my new Bambu Labs X1 Carbon with PETG. I had some layer adhesion issues prior to buying a textured PEI bed for it. The print is designed to test layers. I imprinted a pattern onto a generic bracket to test this, the model above was printed at standard speed 0.16mm layers White Overture PETG 1 Hour 8 Minutes. Hopefully someone else can find this model helpful, I also included a STEP file for anyone who for any reason wants to modify or reuse this model. Thanks for reading!

Tags