Dewalt TStak Flat Top Toolbox Oganizers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer bins for the Dewalt TSTAK folding handle toolboxes.
- Ocena
- 4 / 5
- Polubienia
- 50
- Pobrania
- 162
- Wydruki
- 2
- Wyświetlenia
- 2719
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Organizer bins for the Dewalt TSTAK folding handle toolboxes.
I wanted some more separation for more parts, but also wanted to be able to take the container out of the bin.
Two styles included - short and regular. The Short bins are 4mm shorter than the box so they clear the ridges in the top lid.
The regular versions are designed with cut-outs to allow the lid to close. There are front and back versions, as the front and back notches are in a different spot. Only one of each side is included - you can mirror the x or y-axis in your slicer software to get all 4 bins printed. This will make more sense if you look at the photos and the STL files.
I've included several versions - a full bin, a split bin by vertical and horizontal and a 4-compartment.
Hope this helps someone else!
If you make one, please post a make.
Just about any print settings will work - I use a .4mm nozzle and .3mm layer heights with 3 perimeters.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
10%
Filament: Overture PLA Plus Orange
Category: Organization