Dewalt TStak Flat Top Toolbox Oganizers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organizer bins for the Dewalt TSTAK folding handle toolboxes.
- Rating
- 4 / 5
- Likes
- 50
- Downloads
- 162
- Makes
- 2
- Views
- 2,719
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Organizer bins for the Dewalt TSTAK folding handle toolboxes.
I wanted some more separation for more parts, but also wanted to be able to take the container out of the bin.
Two styles included - short and regular. The Short bins are 4mm shorter than the box so they clear the ridges in the top lid.
The regular versions are designed with cut-outs to allow the lid to close. There are front and back versions, as the front and back notches are in a different spot. Only one of each side is included - you can mirror the x or y-axis in your slicer software to get all 4 bins printed. This will make more sense if you look at the photos and the STL files.
I've included several versions - a full bin, a split bin by vertical and horizontal and a 4-compartment.
Hope this helps someone else!
If you make one, please post a make.
Just about any print settings will work - I use a .4mm nozzle and .3mm layer heights with 3 perimeters.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
10%
Filament: Overture PLA Plus Orange
Category: Organization