Counting matching models…
More updated designs on malerworld since i’ve moved to bambu printers : https://makerworld.com/models/661522?appSharePlatform=copy These nested cups are designed to fit in both the small and large bins from the Dewalt TSTAK Shallow…
After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…
I needed some better organization for all my stuff used often or just occasionally for 3D printing and Arduino making. As soon as I saw the DeWalt TSTAK double drawers I knew those were for me and I was lucky enough to run across…
Fix all the part like the plan in PDF with M4 x 25mm wood screws, I put mine on 388mm x 290mm x 20mm wood bord.
These are designed to fit into the existing trays so you can split the volume into two sections, the inserts come in small and large and single compartment or double or quad. The tray sits about half way down inside the original tray…
Simple organizer design to separate small parts in the dewalt two drawer tstak boxes. They can easily be lifted out as needed. Several versions available depending on what you are storing. I’ve found the 2x2 to work especially well for…
This inserts should work with the Craftman Versastack 2 Draw Tool Box (#CMST17804). https://www.craftsman.com/products/storage-garage/tool-storage/tool-boxes/cmst17804--versastack-double-shallow-drawers I think it should also work with…
Bins and baseplates are optimized to fit Craftsman Versastak drawers and DeWalt Tstak drawers. Fillets and some wall thickness were removed from the bins. Bins and baseplates were both modified to fit 8x3mm magnets instead of the weaker…
Set of designs to make a ‘table top’ or connector for on top of a DeWalt Tstak toolbox. I used one to create a connector to hold my Ryobi Vacuum on top using https://www.printables.com/model/1044158-ryobi-link-wall-mount-single-cleat as…
This is a left and right side base for the DeWALT TSTAK II FLAT TOP tool box (DWST17807). It conforms to the bottom of the tool box so you can fill it with Gridfinity-based containers. I used a magnet base so that the containers won't…
I have reduced the depth of the top drawer by 5mm to allow one at the top and one at the bottom.
UPDATE 30-11-2022 : added lip and adjusted total height to 49mm Dewalt Pro Organizer Shallow Tstak / Stanley FatMax Pro Shallow cup replacement Category: Parts
I wanted a lightweight Gridfinity base for my tstak drawers. I took the outline of the bottom and added the gridfinity base generated by the Gridfinity Openscad model. It should also work with craftsman versastack drawers, but I don't…
Small Parts Storage Bins for Dewalt Tstak / Craftsman VersaStack Bins are different for rear, center, and front rows. Models for single, double, triple, and quadruple bins provided. STL and STEP files provided. Modeled in OnShape.
Updates to ari.mandjelikian 's excellent model to add a few more options to help with storing smaller items. The three-tier version has small pegs to help it locate correctly on the lowest level box that will need some supports. The top…
Made a remix of an existing file to suit the deeper drawer available in the TStak range
This remix increases the height of the central divide so that it sits (pretty much) flush with the underside of the lid. The original model has the divide finishing ~7.5mm short of the underside of lid, meaning that smaller items pass…
This is my second remix of ari.mandjelikian 's cups, for this one I've created ½ height cups that sit in the top half of the original ones and leave space underneath. There are two single-divider versions with long and short dividers,…
I saw ari.mandjelikian 's remix of these cups and they covered almost every scenario I wanted, execept I needed a small deep liner with 3 or 4 compartments, so I fired up Tinkercad and did these three remixes. One is simply a double…
A divider system used to create sections within a YakAttack ShortStak. Consists of mounting brackets, connectors, and dividers. Brackets are secured to the inside walls of the ShortStak. Connectors are secured to the bottom of the…
Update April-26: Thanks to @WK_0bjkt_4142451 for highlighting that some of the newer boxes have additional tabs that prevent these holders from working. Please see his comments for details. v2 update : Improvements to have a tighter fit…
Remix of the original cups by Ari with more subdivisions for shallow divider cups. Helpful for low-quantity or really small parts. I'll upload more subdivision variations as I need them
This plate fits on the front of the Versastack drawer system. I cannot vouchsafe the fit on the Dewalt, but many people duplicate models for both platforms. Please let me know if it doesn't fit the TStak drawers. I've included the 3mf…
// Bit holder organizer for TSTAK DEWALT // Bit holder organizer (20max) made for Dewalt TSTAK box. 17g - 5,80m Dimensions : X : 94 mm Y : 21,6 mm Z : 19 mm
Organizer bins for the Dewalt TSTAK folding handle toolboxes. I wanted some more separation for more parts, but also wanted to be able to take the container out of the bin. Two styles included - short and regular. The Short bins are 4mm…
No supports needed. 0,3 layer. 15% infill.
No supports needed.
Blank drawer inserts so you can make whatever shapes you want in them
My Dewalt Tstak box for an IC-7100 that contains its power supply, tuner (MFJ-939i), the radio, as well as cooling fans and a USB power supply (Anker 6 port). I designed this so I could still plug in my laptop and both antennas and I can…
The model didn't fit my tstak model (version 2) so I very crudely cut out the model in Prusaslicer and exported the STLs
This is a remix that clipped the corners and increased the cup height 4mm. I did the remix using slic3r so to prevent remodeling. I made this change because i'm storing tiny lego in my Dewalt deep pro bins and they migrate over the…
Wer hat sich beim Zelten noch nie an einem Zelthering oder Erdnagel gestoßen? Meist tut es unangenehm weh! Die oft gesehene Lösung mit aufgeschnittenen PET-Flaschen finde ich nicht sehr schön; und außerdem: wozu hat man einen 3D-Drucker?…
I dislike uploads of other peoples work, but I also hate using the thingiverse site, and since I have remixes to post, I'd prefer to just link to models available here on the printables platform. Original description; This bit tray is…
Custom Gridfinity base perfectly fits DeWalt TSTAK Deep Box (DWST17806). Prints in 7 smaller parts to fit smaller printers. Base accepts magnets for extra stability if desired. Stash taller parts in irregular spaces between gridfinity…
Dewalt TSTAK Drawers - Inlay for Halfords Advanced ½" Socket Set https://www.halfords.com/tools/hand-tools/modular-trays/halfords-advanced-26-piece-1%2F2in-socket-set-modular-tray-332518.html Split to fit 220x220mm print bed. Printed at…
This is another Gridfinity base plate for the Dewalt Tstak two drawer unit. I have built it to take the standard 6mm x 2mm magnets. My original did not have magnets and the boxes in the toolkit kept moving around when in transit. The…
A grinding/cutting disc holder for the DeWalt TSTAK case. Will hold 3 x 3mm, 3 x 5mm and 3 x 7 mm 125 mm discs. Angled to fit, yet not enough room for the discs to fall out of the holder when the lid is closed. The holder fits in the…
Remixed to add magnets. It was actually entirely redrawn but based off randomcreator's model.
Slimmer gridfinity spanner holders with a few options, original slot size, slightly wider slots and a very wide 2 holder
DeWalt TSTAK Shallow Drawer ToughCase+ Insert Custom 3D-modeled ToughCase+ insert designed to fit DeWalt, Stanley, and Craftsman shallow drawers. Compatible with: DWST1-70706 FMST1-71969 CMST-17804 This insert provides a precise fit to…
Sketchup project included. Use M4 rivets and double sided tape between box and part. Also put biggest washers as you can from both sides of rivets. Part was optimised to not crack after applying the rivets. Use M4 bolts if you want to be…
Reversible Dewalt TSTAK Workplate with Whiteboard Functionality Upgrade your Dewalt TSTAK case with the Reversible Top Workplate , an innovative accessory that transforms your toolbox into a portable workbench and whiteboard. Perfect for…
Replacement part for the hinge between cover and pullbar. This is for the DWST83347-1 This is a weak construction from DeWalt, which broke on mine. Therefore this replacement, which is much stronger. You need to remove the old (broken)…
remixed from eric-anasta's wonderful template to fit my double deep dewalt tstak box and hold all my router bits. split into 6 pieces with alignment tabs that I glued together. Its mostly 1/4" holes but some 1/2" on the sides and holes at…
I bought a 21 piece Forstner bit set from MLCS. I wanted to put it in my under-drill-press storage which uses Dewalt TSTAK drawers, this is the result. It may fit other brands YMMV. The F3D file I used to generate these is included,…
Add a convenient tether point to the top or side of a YakAttack BlackPak or ShortStak. I keep fish grips, pliers, line cutters, and other small tools tethered to my kayak. Traditional milk crates provide plenty of places to clip them, but…
TSTAK Wall mounting bracket and support bracket. Support bracket only required if box + contents >5kg. Settings: 4+ walls. 50%+ infill. Greater the infill, the more secure the bracket. Tested with 10kg total weight when using the support…
Replacement part for the hinge between cover and pullbar. This is for the DWST83347-1 This is a weak construction from DeWalt, which broke on mine. Therefore this replacement, which is much stronger. You need to remove the old (broken)…
Organizer for a tap and die kit for the Tstak and Versastack drawers. The tap and die kit that this is based off of is the Husky kit from Home Depot. The front of the die can be mirrored to get both sides.
Dewalt TStak Deep Drawer Gridfinity Insert
DEWALT TSTAK ORGANISER BIN INSERTS. Insert organiser bins for the DeWalt TSTAK system. Bins are designed primarily for the medium bins, with a ‘bottom’ insert, and ‘top’ insert which is held in place by the 4 corner tabs/guides. There are…
These are some Inserts for the Dewalt TSTAK Drawers, they sit inside the drawer sections allowing you to put smaller items in, they have lids as well to stop spillage when you carry the drawers on their side. There are options: - Single…
voron 0.2 MiniSB_Motor_Plate with M3 Brass heatstake inserts - short M3x5x4
Here are some labels holder for printed Dymo stickers or hand written text for the Dewalt / Stanley / Craftsman TSTAK FATMAX Versastack Organizers. You don't need to use any supports to print it. I printed it with these parameters: - 0,2…
Haken für 4,5mm Holzschrauben, um diese als Schraubheringe zu verwenden. Printer: Ulrimaker S3E Filament: Extrudr glowEx PETG Infill: 100%
Vytvořil jsem přihradku do pořadače dewalt FAT MAX TSTAK. Je stohovatelna. Tisknul jsem ji v petg I created a compartment for the dewalt FAT MAX TSTAK file. It is stackable. I printed it in PETG
Middle mount that enables chaining multiple DeWalt clips side-by-side between the end mounts (original model). These will work independently but I recommend adding end mounts from the original creator ( TheProjectWheel ) as they have a…
This model is a divider that fits inside the tstak box of dewalts DCF982NT impact driver. Each of the circular divisions is 75mm deep and has a diameter of 30mm, it can hold the inbus bits for this impact driver and could potentially fit…
Permet d'intégrer le heatgun DCE530 dans un TSTAK II de dewalt. il peut contenir le heatgun, une batterie supplémentaire, un chargeur rapide DCB115 et les embouts. J'ai mis des trous pour le montage, il suffit de mettre du fil de bobine.…
This insert for the T-Stak drawer and WERA Kraftform Big Pack 100 VD T-Stak drawer keeps the screwdriver organized.
Modified the Clickfinity base for the DeWalt TSTAK 2 Drawer Toolboxes. Printed in PETG. Thank you FPV Smitty for a great model!
Small containers for DeWALT flat top TSTAK Box.
Dewalt TSTAK Drawer Insert for protool 1/4 inch torque wrench, 1/2 inch ratchet, 1/4 inch ratchet and bits for both. Adjusted base model slightly to provide more clearance around the dewalt drawer molding in a couple of spots.
A snug Gridfinity setup for the clear-lid TSTAK organiser (DWST17805). Two baseplate tiles (7×5 grid) that butt together, plus plain spacer strips that fill the gaps to the walls. No glue and no snap clips; the box holds everything in…
Gridfinity baseplates and bins for four more TSTAK sizes, each from DeWalt's published interior table: the deep drawer unit, the 2-drawer unit, the flat-top case (and deep box, same floor), and the long-handle case. Dimensions used…
Overview I created this base from an existing grid template (thanks to Arizzle who made the grid ) that integrates with the shapes of the box. The base improves the recovery of small parts that can fall into the grid and the feet hug the…
Update April-26: Thanks to @WK_0bjkt_4142451 for highlighting that some of the newer boxes have additional tabs that prevent these holders from working. Please see his comments for details. v2 update : Improvements to have a tighter fit…
Background: This is a Gridfinity baseplate that fits into the standard depth and deep toolboxes made by Craftsman (Versastack Model No. CMST17830 & Model No. CMST17825) and DeWalt (TSTAK Model No. DWST17807 & Model No. DWST17806). The…
This model is a divider that fits inside the tstak box of dewalts DCF982NT impact driver. Each of the circular divisions is 75mm deep and has a diameter of 30mm, it can hold the inbus bits for this impact driver and could potentially fit…
These are some Inserts for the Dewalt TSTAK Drawers, they sit inside the drawer sections allowing you to put smaller items in, they have lids as well to stop spillage when you carry the drawers on their side. There are options: - Single…
Dewalt TStak Deep Drawer Gridfinity Insert
More updated designs on malerworld since i’ve moved to bambu printers : https://makerworld.com/models/661522?appSharePlatform=copy These nested cups are designed to fit in both the small and large bins from the Dewalt TSTAK Shallow…
Add a convenient tether point to the top or side of a YakAttack BlackPak or ShortStak. I keep fish grips, pliers, line cutters, and other small tools tethered to my kayak. Traditional milk crates provide plenty of places to clip them, but…
Background: This is a Gridfinity baseplate that fits into the standard depth and deep toolboxes made by Craftsman (Versastack Model No. CMST17830 & Model No. CMST17825) and DeWalt (TSTAK Model No. DWST17807 & Model No. DWST17806). The…
