1 / 6
Cable Clips, Cable and Tubes Management
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to design a simple cable clips because I did not like much the comercial ones, and they are very difficult…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 126
- Wydruki
- 2
- Wyświetlenia
- 926
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (38)Powiązane
I decided to design a simple cable clips because I did not like much the comercial ones, and they are very difficult to find in the area I live. And they are even cheaper at least for me.
Characteristics:
- They have an hexagonal shape so they can be aligned better that the square or round ones.
- The cable tie can be inserted from the top or from the side instead of only from the side on comercial version.
- They can be sticked with double side tape, glue, hot glue, etc.
- They can NOT be installed with screw :-(
- Two different sizes (Small, Big).
- Admits different sizes of cable ties.
- Very easy to print, big adhesion surface and no supports needed.
- Can be printed on any material that meet your needs.
- Many units can be printed in one go.
- Price per printed unit: 0.1-0.2€/$ or less depending on material and size.
- Posible to customize at Onshape, here is the link: https://cad.onshape.com/documents/095849beec4caedf25f2f278/w/3aba416b7ede97c91c66ba40/e/83df1d800544f6f76c65881a
Print instructions
Print recommendations:
- 0.4mm Nozzle
- 0.2mm Layer high
- 0.5-0.6mm Extrusion width
- No brim or raft.
- No supports