3D printed PC/Server Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed PC case I designed to be used for my server computer. Using Micro-ATX MB, ATX PSU, 1 SSD, 1 120mm Fan.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 1499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3D printed PC case I designed to be used for my server computer.
However I never got around to finishing it, due to the parts broke down from a short circuit.
But I figured someone else might find this case interesting enough to use it.
It was meant to be mounted on the wall, and have the fan at the top. To aid the natural convection air flow. Based on the fact that heat rises and all.
And there would be only one fan in the case, the PSU casing was intended to be removed for proper air flow over the PSU circuits. While the CPU cooler could use the standard fan if one wanted to, or a proper arranged passive 3rd party heatsink with fins and heatpipes.
Motherboard: Micro-ATX
PSU: ATX
CPU cooler: intel/AMD stock in size, slightly larger.
Storage: Single SSD, with possibility to add at least 1 more.
Cooling: Single 140mm Fan, standard without rubber mounts like Noctua.
Custom air filters, filter material can be cut with scissors https://duckduckgo.com/?q=filter+material+mesh&atb=v316-1&iax=images&ia=images
Hope this will inspire someone into making their own PC Case.
If there are any issues, leave a comment down below.