Prusa Original Enclosure Rear Fan Blanking Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blanking plate for 120mm fan cutout on rear panel of Prusa Original Enclosure
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 127
- Wydruki
- 2
- Wyświetlenia
- 1296
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
If - like me - you assumed the rear fan cutout was for the HEPA filter kit and went straight ahead and popped that PETG panel out on your enclosure, you'll be left with a big old hexagonal hole in your rear panel, which somewhat defeats the purpose of an enclosure…
So, here's a blanking plate you can install to cover up your mistake, with a little reminder :)
Use 4 x Plastic Rivets - you should have plenty spare from the Prusa Original Enclosure build. I've printed two in PETG at 0.3mm Draft settings, but feel free to use whatever settings you like.
I have fixed the text orientation since the uplaoded picture, yours will be the right way up!