Ubiquiti Unifi G4 Instant Articulating Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully articulating mount based on a previous design for a G3 mount but the G4 camera is just slightly larger.
- Ocena
- 5 / 5
- Polubienia
- 135
- Pobrania
- 850
- Wydruki
- 10
- Wyświetlenia
- 5950
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a mounting system for the Unifi G4 Instant Security camera based on an excellent design for the G3 Instant. This design uses a corner bracket or flat mount with a dovetail socket, a 2 piece hinge that slots into the dovetail, and a hinge piece molded to the backside of the camera itself.
I have printed it successfully in PLA and PETG with supports and a higher infill (40%).
You will need the following additional hardware for the camera mount and hinges.
- #10 x 2 ½" machine screw with nylock nut (hinge)
- #10 x 1 ¼" machine screw with nylock nut (hinge)
- ¼"-20 x ½" hex socket head cap screw (camera)
- 2 x #6 flathead wood screws (mount attachment)
Full credit goes to the original author for his excellent design.
Unifi G3 Mini Camera Mount
by abakedapplepie March 19, 2021
https://www.thingiverse.com/thing:4799966