Ubiquiti Unifi G4 Instant Articulating Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fully articulating mount based on a previous design for a G3 mount but the G4 camera is just slightly larger.
- Rating
- 5 / 5
- Likes
- 134
- Downloads
- 847
- Makes
- 10
- Views
- 5,931
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a mounting system for the Unifi G4 Instant Security camera based on an excellent design for the G3 Instant. This design uses a corner bracket or flat mount with a dovetail socket, a 2 piece hinge that slots into the dovetail, and a hinge piece molded to the backside of the camera itself.
I have printed it successfully in PLA and PETG with supports and a higher infill (40%).
You will need the following additional hardware for the camera mount and hinges.
- #10 x 2 ½" machine screw with nylock nut (hinge)
- #10 x 1 ¼" machine screw with nylock nut (hinge)
- ¼"-20 x ½" hex socket head cap screw (camera)
- 2 x #6 flathead wood screws (mount attachment)
Full credit goes to the original author for his excellent design.
Unifi G3 Mini Camera Mount
by abakedapplepie March 19, 2021
https://www.thingiverse.com/thing:4799966