Desk Stranding - Magnet Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet base for your desk stranding light
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 986
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a magnet mount for the Desk Stranding - The Death Stranding Desk Lamp by Nils Kal | Download free STL model | Printables.com
It uses 4 magnet clips super/gorilla glued to slots on the back. Very strong and holds the light up very well. Because magnet faces are flat and the metal surface is flat, if you have the light head turned one way or the other the whole thing will lean that way because of weight and no friction holding the magnets in place. To counter this, just pivot the whole light/magnet the opposite direction it is leaning.
I used 4 magnet plates which consists of 8 neodymium magnets(2 in each plate). The magnets I used are Amazon.com : HAZOULEN Name Badge Magnets, Magnetic Name Tag Holders, Set of 12 (24 Pieces) : Office Products(discontinued but they have the dimensions and there are plenty others of the exact same out there)
I printed in Hatchbox PLA Pro with 15% infill, no supports. Printed flat with the mounting bracket facing up.