AO-10x Bracket for pablogil's Full Graphic LCD Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket will allow you to mount the Full Graphic LCD case to your Mendelmax / Ao-10x style Upper Gantry frame…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This bracket will allow you to mount the Full Graphic LCD case to your Mendelmax / Ao-10x style Upper Gantry frame (Should work with a TAZ too for that matter) I've included two mounting styles, one will require support to print. There is also a connection cover backplate, though that particular piece as designed will be a pain to print. It's there if you want to attempt it anyways.
Print instructions
Category: 3D Printer Parts Summary
This bracket will allow you to mount the Full Graphic LCD case to your Mendelmax / Ao-10x style Upper Gantry frame (Should work with a TAZ too for that matter) I've included two mounting styles, one will require support to print. There is also a connection cover backplate, though that particular piece as designed will be a pain to print. It's there if you want to attempt it anyways.
Instructions
The tabless version should print fine without support. uses M5 mounting screws. The tabbed version will require support, The backplate mounts with M3 screws and sandwiches the mount and the LCD case itself. It will rewquire massive amounts of support to print, but most of the support marks will be hidden internally, so I think it still serves its decorative purpose adequatly. I plan on making an additional cable routing piece once I figure out how everything needs to route once I have this printed and on the machine.