Raspberry Pi 3 + Waveshare 5" for Ender 3 S1 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Raspberry Pi 3 case for Ender-3 S1 Pro and Waveshare 5" DSI touchscreen. Landscape and portrait versions.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 175
- Wydruki
- 2
- Wyświetlenia
- 2474
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hi,
I needed a case for a Raspberry Pi 3 and a Wondershare 5" DSI touch display to get Klipper on my Ender 3 S1 Pro. I found SailllingStone's design but it was made for the Rpi4 (different layout) and had some issues.
Here are the improvements from SailingStone's design:
- Replaced threaded holes on the back cover with normal holes with tight tolerances
- Bigger holes for the fan (fits with screws normally included with computer fans)
- Adjusted the holes position for the screen screws
- Added an opening for the Micro-USB power plug
- Bevels around the screen
- Fixed the Raspberry Pi logo being upside down
You'll need 8 M2.5x8 screws to mount the cover.
Feel free to comment and post it if you made it!
UPDATE 08/01/23:
I added a modified version of the back cover for portrait mount.
To change the display's orientation, you'll need to edit 2 files on the Rpi:
Change the display orientation:
- Connect to your Rpi via SSH.
- Type: sudo nano /boot/config.txt
- At the end of the file, add: display_lcd_rotate=3
- Press Ctrl+X to exit nano. Press Y and then Enter to save the file
Change the touchscreen orientation:
- Type: sudo nano /usr/share/X11/xorg.conf.d/40-libinput.conf
- At the end of the touchscreen section, just after “Driver ”libinput"", add: Option "TransformationMatrix" "0 -1 1 1 0 0 0 0 1"
- Press Ctrl+X to exit nano. Press Y and then Enter to save the file.
- Type: reboot