Upgraded fan duct (exposed print head setup) for Anycubic Kobra Go
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Kobra Go! For greatly increased coverage of airflow around nozzle for part cooling fan.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 448
- Wydruki
- 10
- Wyświetlenia
- 4114
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
You'll be able to replace your original print head housing with this exposed print head setup using only the original screws.
SETTINGS: Slice the model upside-down (see photo) with a tree structure support in a zig zag pattern only touching build plate with a 1mm x/y distance and a 50 degree overhang angle.
ASSEMBLY: (see photos) step one - drop the part cooling fan into the fan duct. screws are optional here because it should be a very snug and secure fit. Step two - fasten the hot end cooling fan using the 16mm screws. Step three - fasten the housing to the print head using the 12mm screws. Step four - Print and enjoy your new surface quality and overhang abilities!