Olimex ESP32 POE ISO project box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for project described here: https://hackaday.io/project/166985-wol-with-google-homealexa-ifttt-esp32-poe-iso…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 241
- Wydruki
- 1
- Wyświetlenia
- 2297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Designed for project described here: https://hackaday.io/project/166985-wol-with-google-homealexa-ifttt-esp32-poe-iso
note: this is for an older version of the ESP32 POE ISO board (Revision B) and it does not fit the current version which has had its footprint changed
Does have room to solder wires directly to the ESP32-PoE-ISO board + also for a resistor and a LED
Does NOT room have if you have soldered header pins onto the ESP32-PoE-ISO
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
15%
Notes:
I used PLA, the board can get a little warm, PTEG might be better?
How I Designed This
fusion 360 - beginner - many hours learning the tool
Category: Electronics