Remote holder for Govee LED light strip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for the remote of Govee LED light strips
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder is designed to securely hold the remote for your Govee LED light strip. My model was H619C and had a pill shaped remote. This is the remote most of their strips use nowadays, but you may want to check before printing this as your could be different.
Since these were part of my project to add LED strips to frames to take on and off easily during the holiday months I did not want to use the adhesive on the back of the remote. I affixed these holders to my plastic window frames using folded packaging tape as this will be more temporary. I wanted to be able to remove the holder and the frames with the attached LED strips when the holiday season is over.
- Printed with Overture Transparent PETG at a layer height of 0.2mm
- Please note that the gcode file includes ‘X25 Y100 Z200’ as coordinates to rise to after printing.