Skadis Containers and Shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collection of Skadis compatible containers and shelves, using the T-Clip System by Will.
- Ocena
- 4,75 / 5
- Polubienia
- 113
- Pobrania
- 541
- Wydruki
- 5
- Wyświetlenia
- 2257
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Organize that Skadis!
Download these Skadis compatable organizers today, and keep your workspace free of pens and benchies 😉
This design uses the Skadis T-Clip System by Will, you can download the required clips from there! You will need two clips per container/shelf.
They are designed to fit next to each other on your Skadis, with a small gap between them. They should also be compatible next to Ikea branded containers and shelves.
Print settings
Prints should take around 2.5 to 5 hours, depending on model size and print settings.
Rafts:
No
Supports:
No
Resolution:
0.2 ~ 0.25mm
Infill:
15 ~ 20%
Updates
2022-12-15 – Added a taller/deeper version of the containers, also uploaded the STEP files for customizing.