1 / 5
Maker Badge case v2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case to protect battery and display. Optional modules coming soon.
- Ocena
- 4,75 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 5
- Wyświetlenia
- 368
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Maker badge case
You can choose from multiple versions:
- sMakerBadge-case: Big battery compartment (no additional dividers)
- MakerBadge-case-SmallBat: has a small battery compartment so Original Li-Po battery fits here and is nicely protected (20x30mm space). Remaining space can be utilized for some fun circuits.
Changes in remix
Original model served well as an inspiration and for a basic shape.
- compartments arrangement
- ability to run wires underneath and add some electronics (like accelerometer)
- better notch to hold PCB (without supports)
- protrusion that protects display from accidental side-smash
Options for modules
I plan to make another slightly adjusted version, that would allow adding a connector to the bottom side and snap-connect extension modules.
- any solid material you want (PLA, PETG) in about 1h.
- Supports are needed in the top section where the strap goes. I used snug detachable supports in Prusaslicer. Whole area does not need to be selected, the part indicated in blue is enough. I used paint-on-supports with triangles option.
- I adjusted the infill pattern angle to 90° so it bridges only a the short distance.
The hardware
Maker badge is made by @dronecz and can be bought here.
Related models: