1 / 4
Dewalt DWE6411 to Ridgid HD06001 Hose Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find an adapter that fit my Dewalt DWE6411 sander and Ridgid HD06001 vacuum, which has a 1 7/8 inch hose,…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
I couldn't find an adapter that fit my Dewalt DWE6411 sander and Ridgid HD06001 vacuum, which has a 1 7/8 inch hose, so I followed this great tutorial by Becky Stern and used Tinkercad to design one.
I assume this would fit any brand vacuum with 1 7/8 inch hose.
Versions:
- v2 is the version I printed and is what's shown in the photo. It's a little loose on the Dewalt side, but works perfectly fine.
- v3 is edited slightly for a snugger fit on the Dewalt side, but I didn't actually print it to test. If you print it, let me know how it works for you.
- There is no v1.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Resolution:
0.2
Filament:
Inland PLA
Silver
Notes:
I printed this vertically and used a brim, but if you have good adhesion you probably don't need that.
Category: Hand Tools